Home > Hard Drive > RAID 1 Array Incompatible With DVD ROM Optical Drive?

RAID 1 Array Incompatible With DVD ROM Optical Drive?


I setup a striping array on (SATA 4) (my os hard drive) and connected an IDE DVD Drive. Support Forum Join the conversation! Tell them that you believe repair should be fair, affordable, and accessible. It saw the RAID array.Man it was an instant relief. 7 is the same. http://puchinet.com/hard-drive/raid-hard-drive.php

We’ve got to be louder than their lobbyists. The Pentium D shipped in an LGA775 package, and these are still readily available. It says "expert mode" and it's just a setting. I didn't want to re-install windows (until vista) and then I might switch things around.

How To Connect Ide Hard Drive To Sata Motherboard

Even so, the Windows 8 setup retained none of my applications—only data files! I would load them all on a disc, and try installing them at the beginning of the windows install.http://support.asus.com/download/download.aspx test_dummyAug 2, 2010, 3:54 PM I have tried to install the SATA THANK YOU for posting this!! Faster, second-generation SATA drives and interfaces began shipping in early 2005.

So I try to load the 64bit drivers for the SATA controller and it finds them okay but when i try to install, it says something like "no new devices found". An SATA cable may be as long as 1 meter (39+ inches), versus the 0.45 meter (18") limitation of PATA. Ask the community! What Are The Two Goals When Implementing A Raid Solution I put in a new motherboard recently and couldn't figure out why I could no longer access my IDE HD.

If you want to install only one hard drive and do not wish to use the advanced SATA (AHCI) features (such as hot swapping and Native Command Queuing), select IDE mode Sata And Ide Hard Drives Together In ATA terminology, a device whose controller is enabled is called a master; one whose controller is disabled is called a slave (ATA predates Political Correctness). chedderslam1976Jul 30, 2010, 4:58 AM I don't think Windows will see the drives if they are not enabled. Proffitt Forum moderator / July 19, 2005 8:43 AM PDT In reply to: Mixing SATA and IDE drives in a system?

The Radeon 9800XT once offered the acme of graphics performance. Ide Hard Drive Jumper Settings neither of this partitions let me install windows as they say it cant read the SATA drive.> the third thing that i found really weird was that when i reinstalled windows If standard master/slave jumpering is used, the master drive must still be attached to the black connector, because ATA-66, ATA-100, and ATA-133 do not allow a single drive to be connected Press the key once every second until a BIOS Setup utility screen opens.

Sata And Ide Hard Drives Together

Sorry There was an error emailing this page. But the exercise allowed me to explore the boundaries of what's possible—and to learn some valuable lessons about the Windows 8 setup process along the way. How To Connect Ide Hard Drive To Sata Motherboard Figure : Example BIOS page Turn off the computer and wait five seconds. Ide And Sata Drives In Same Computer The Asus motherboard is built on a P965 chipset.

Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion weblink Either drive may be connected to either drive connector. Serial ATA¶ Serial ATA (also known as SATA or S-ATA) is the successor to the older ATA/ATAPI standards. Troubleshooting SATA Controller Mode problems The following errors can display if the SATA Controller Mode is set to the wrong setting. Motherboard With Ide And Sata Ports

With standard ATA cables¶ For standard ATA cables, here's how it works: All connectors are black. The errors continued, but less frequently. Although current PATA drives are not bandwidth-constrained when operating one per channel, installing two fast PATA drives on one channel throttles the throughput of both.PATA allows only one device to use navigate here SATA has several advantages over ATA, including smaller cables and connectors, higher bandwidth, and greater reliability.

If you jumper a drive as CSEL, the position of the drive on the cable determines whether the drive functions as a master or a slave. How To Make Ide Boot Instead Of Sata It's really a clean install that saves all of your user files, but kills your applications. But we need your help.

Every ATA and ATAPI device has an embedded controller, but ATA permits (and requires) only one active controller per interface.

Thank you for helping us maintain CNET's great community. But if you connect two CSEL drives to a standard cable, both function as master, which may result in anything from subtle problems to (more likely) the system being unable to However, if the drives are jumpered as CSEL, replacing a 40-wire CSEL cable with an 80-wire cable causes the drives to exchange settings. How Many Hard Drives Can Be Connected To A Single Ide Cable The 20x Samsung and Optiarc drives that got so many rave reviews have been discontinued.

It’s time to fight for your right to repair and defend local repair jobs — the corner mom-and-pop repair shops that keep getting squeezed out. Flag Permalink This was helpful (1) Collapse - I've had this config. A standard/CSEL ATA cable supports either master/slave jumpering or CSEL jumpering for connected devices. his comment is here According to the reference guide(http://download.intel.com/support/chipsets/imsm/sb/reference_content_intelmatrixstorageconsole.pdf)I should be able to remove the Degraded disk, replace with a new disk, and it would startup as per normal.Then all I needed to do is

So I'm going to have to upgrade to be able to boot from SATA and add back all my IDE drives.I haven't found an upgrade for the mobo so I can About Us Contact Us Digital Edition Customer Service Gift Subscription Ad Choices Newsletters Privacy Policy RSS Terms of Service Agreement E-commerce Affiliate Relationships PCWorld CATEGORIES Business Laptops Mobile PC Hardware Printers Your mobo sounds similiar to mine. Because hard drives use 512-byte sectors, that translates to a maximum supported drive size of 137,438,953,472 bytes, or 128 GB. (Drive makers use decimal GB rather than binary GB, and so

Usually a low-level format of the new hard drive fixes the system.Did you make sure to get the same manufacturer, model, and firmware revision of hard drive, to replace the old But when I first built my machine and setup my normal RAID 0, put in the Vista disk I thought, yay!!!! Then use the other ports for optical drives. I was actually pleased by my system's Windows Experience score of 4.4.

solved Windows 7 Wont install "A required CD/DVD drive device driver is missing" solved [SELF-SOLVED] Windows 7 Install "A required CD/DVD drive device driver is missing" solved Windows 7 install "A Either connector can mate interchangeably with the data connector on the drive or the SATA interface on the motherboard. i thought it would be helpful to those wiv the same problemshope this helpsbabs Flag Permalink This was helpful (0) Collapse - SATA & IDE Combination Troubles--but w/ SATA adapters IDE's It didn't seem my SATA DVD drive would work with Raid enabled on it.

For this, restart the system and run BIOS Setup (you'll need to press a key as your system is booting up; often the key is either F1, F2, Esc or Del). To automatically resolve problems with the STOP 0x0000007B INACCESSABLE_BOOT_DEVICE error message, click the Microsoft Fix it Solution: MS Fix it Err1Err3 or Stop Error 07xb error message If Err1Err3 is shown Whats the point of Raid 1 Mirror? These two interfaces are identical functionally, but the system assigns a higher priority to the primary interface.

No problems in over a year of use. Select this jumper position if this is the only device connected to the interface, or if it is the first of two devices connected to the interface. Proffitt Forum moderator / December 10, 2006 3:26 AM PST In reply to: SATA HDD + IDE drives w/ SATA adapters Burying a new discussion here is not going to find But we need your help.

A standard ATA cable may be used with any ATA/ATAPI device through UltraATA-33 (UDMA Mode 2). Because most PCs and small servers do more reads than writes, RAID 5 is often the best compromise between performance and data redundancy. Modify your browser's settings to allow Javascript to execute. Privacy Policy © Copyright 2017 HP Development Company, L.P.